| Pike
Brio 31/9-05 |
|
CG |
118mm |
Hook : apx:
104mm from leading edge |
| Surface/acting
as |
Mode |
Direction |
Travel |
|
| Aileron/Aileron |
start |
up |
16mm |
all measured
at wing tip, 40% expo |
| |
speed |
up |
16mm |
|
| |
Thermal |
up |
16mm |
|
| |
start |
down |
8mm |
|
| |
speed |
down |
8mm |
|
| |
thermal |
down |
6mm |
|
| Flap/Aileron |
start |
up |
7mm |
all measured
at wing root |
| |
speed |
up |
7mm |
|
| |
thermal |
up |
7mm |
|
| |
start |
down |
6mm |
|
| |
speed |
down |
6mm |
|
| |
thermal |
down |
6mm |
|
| Aileron/Crow |
All |
up |
9mm |
at tip |
| Flap/Crow |
All |
down |
90degr |
at root |
| Elevator/crow
mix V-tail |
All |
down |
2/4mm |
measurement
at half/full crow at ele tip. |
| Elevator |
All |
up |
6mm |
all measured
at tip, 40% expo |
| Elevator |
Speed |
up |
6mm |
all max movement
-9/+10 (ele/rud togheter) |
| Elevator |
All |
down |
5mm |
|
| Elevator |
Speed |
down |
5mm |
|
| Rudder |
Speed |
up |
7mm |
40% expo. no
combi switch other than in start and F3F |
| Rudder |
thermal |
up |
7mm |
40% expo. no
combi switch other than in start and F3F |
| Rudder |
Speed |
down |
5mm |
40% expo. no
combi switch other than in start and F3F |
| Rudder |
thermal |
down |
5mm |
40% expo. no
combi switch other than in start and F3F |
| Speed
flap (flap) |
speed |
up |
0-2mm ? |
Equal along
all trailing edge |
| Speed
flap (ail) |
speed |
up |
0-1,5mm |
Measured
at tip |
| Speed
flap (ele) |
speed |
down |
0-0,5mm |
|
| Start
flap (flap) |
start |
down |
14mm |
Equal along
all trailing edge |
| Start
flap (ail) |
start |
down |
apx 8mm |
|
| Start
flap (ele) |
start |
down |
0,5mm |
Can
be -0,5mm depending on hook and CG |
| Thermal
flap (flap) |
thermal |
down |
0-6mm |
Equal along
all trailing edge |
| Thermal
flap (ail) |
thermal |
down |
0-..mm |
|
|
|
|
|
|
| X-tail:
(picture) |
|
|
|
|
| Elevator |
neutral |
|
89,5mm |
Measured
on top of steel rod and below tail. See picture |
| Elevator |
start/speed |
|
88,5mm |
If
used in start the hook needs to be apx 103mm |
| Elevator |
crow |
|
86/85mm |
measured
at half/full crow with aileron only 7mm up |
| Elevator |
All |
up/down |
94/85mm
(82 w/crow) |
Servo arm
might need to be long if not fast servo is used. |
| Rudder |
All |
left/right |
apx 30mm |
apx 10mm
combi-switch
while launching |
|
|
|
|
|
